Versions Compared

Old Version 2

changes.mady.by.user Amy Craig

Saved on

compared with

New Version 3

changes.mady.by.user Amy Blanchard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Operating Systems: Windows & Macintosh
Applies to Versions: DVMAX 7.5.1 & Up
and higher
Purpose: DVMAX can now send client & patient information to an existing Cubex Cabinet with a practice.
All DVMAX workstations needing communication within a practice.This document reviews the steps needed to configure a one-way integration (sending data from DVMAX to Cubex).

Note: DVMAX v8.5 introduced a two-way integration with data flowing from DVMAX to Cubex and information from Cubex going to DVMAX. Review our Cubex Two-Way Integration documentation for configuration instructions.

(info) All DVMAX workstations that will communicate with Cubex must have internet Internet access and be capable of accessing Cubex features over the internetInternet. If your security is high, please consult with Cubex for information on what websites and ports may need to be opened for the feature to work.

Configuring DVMAX to send information to Cubex

Note: The following setup requires you to have login credentials provided by Cubex. Please contact Cubex support if you do not have the information specified in this section.

  • Log into DVMAX Client as the Administrator.
  • Click on the Section menu, hold down the SHIFT key, then choose System Constants.
  • A warning will appear, read it fully and click I Understand.
  • On the Settings tab, scroll through the alphabetical list and search for settings that begin with cubex.
    • Fill

...

    • in cubex.password as provided by Cubex.
    • Fill in cubex.siteCode as provided by Cubex.
    • Fill in cubex.username as provided by Cubex.
    • Fill in cubex.webServiceHost with http://mycubex.net/Webservices/AutocribWSPost.asmx
    • If you wish to have patients marked as In Hospital status automatically send information to the Cubex cabinet, change the setting cubex.InHospital to say True.
  • Close the Advanced Settings window when done by clicking the Red X or Dot at the top of the window. The changes will take effect immediately.


Using the Cubex Integration Feature in DVMAX

Once the Setup is complete, you can add or delete a patient from the Cubex cabinet in one of three ways:

...