Applies to: DVMAX v8.5 or higher
Purpose: DVMAX v8.5 introduced a two-way integration with Cubex Cabinets. This integration will allow your hospital to send patient information from DVMAX to a Cubex cabinet and receive information about items dispensed for a patient (item and quantity) from a Cubex cabinet onto a patient invoice in DVMAX. The following steps will walk you through the necessary DVMAX configuration steps.
**Prior to starting the cubex integration and setup, contact DVMAX Technical Support at 1-800-950-5455 to have them update the advanced setting values to the new Cubex URL's**
Preparation
To successfully configure DVMAX, you will need:
...
| Info |
|---|
It is very important that Cubex be involved prior to the setup as they should clear and turn off the Cabinet's queuing of orders until AFTER the configuration is done. Failure to do so will result in DVMAX collecting OLD ordered information and populating it onto invoices. All DVMAX workstations that will communicate with Cubex must have Internet access and be capable of accessing Cubex features over the Internet. If your security is high, please consult with Cubex for information on what websites and ports may need to be opened for the feature to work. |
Configure Cubex Account in DVMAX Integrations Setup Wizard
...
Contact Cubex support for this text file if you do not have it.
5. The Cabinet Codes will import and appear on screen as seen below. You can now begin mapping these to your DVMAX Bill items.
6. Click on the Billing Codes tab.
7. For each bill item that you want connected to Cubex, double click on the bill code and enter in the corresponding Cubex Code
You can use the Filter at the bottom of the window, and sort by Code or Description to aide you in setting up your codes.
| Info |
|---|
If you do NOT map a Cubex Code to a DVMAX Bill item, and that item is dispensed from the Cubex Cabinet, it will go onto your DVMAX invoices as Rx9999 and no description or price identifier. |
Configure the Cubex Monitoring Station
...
- In DVMAX Client, go to the File menu then choose Preferences.
- The Cubex Monitor settings will exist at the bottom of the Assorted Prefs tab.
- Check the Auto Start box, and press the Start Monitor button. This station will not check the Cabinet every second for changes.
Start the Cubex Cabinet Queue
...