Connecting Client Application to Server

Owned by Amy Blanchard
Apr 15, 2020
2 min read

Applies to: All DVMAX versions

Purpose: If the DVMAX Server IP address changes, the installed client application (not the web version) will have to “locate” the server application. The steps below will show how to accomplish this.

 

After changing the IP address of the server and launching DVMAX server application on the new IP address, the DVMAX client applications will see the following…

 

 

Click continue and then you should see the following…

 

 

Click the Custom tab and in the Database Name field enter DVMAX and in the Network Address field enter the new IP address of the server (see image below), click ok afterwards and DVMAX should connect.

**NOTE: You’ll need to get the new IP address from your IT team; the address entered here is an example only.