/
Re-transmit your Abaxis VS2 results to DVMAX
Re-transmit your Abaxis VS2 results to DVMAX
Operating Systems: All
Applies to Versions: 7.0 and Up
Occasionally there will be the need to re-send a result from your Abaxis VS2 machine to DVMAX - either as a test, or because of connectivity failures. Below are the steps you can take to perform this task.
From the Home screen, Click the Folder icon.
Click on the Browse button, and scroll through the results. Locate the patient ID you wish to resend and choose it.
At the bottom right, choose Print
At the bottom, uncheck Print checkbox and click XMIT checkbox.
, multiple selections available,
Related content
Re-Transmit your Abaxis HMII / HM2 / HM5 Results
Re-Transmit your Abaxis HMII / HM2 / HM5 Results
More like this
Configuring the Abaxis VS2 with DVMAX
Configuring the Abaxis VS2 with DVMAX
More like this
Configuring your Abaxis HMII / HM2 / HM5 with DVMAX
Configuring your Abaxis HMII / HM2 / HM5 with DVMAX
More like this
Configuring the Abaxis Vetscan Classic with DVMAX
Configuring the Abaxis Vetscan Classic with DVMAX
More like this
Configuring DVMAX with IDEXX Vetconnect PLUS
Configuring DVMAX with IDEXX Vetconnect PLUS
More like this
Re-Transmit Your Antech Results
Re-Transmit Your Antech Results
More like this